BS 5266-1:2011 Emergency lighting – Part 1: Code of practice for the emergency escape lighting of premises
Maintenance will be taking place on BSI Shop and standards catalogue on Wednesday 25 May between 17:00 to 23:00 BST. BSI Shop will be unavailable during this time. Please accept our apologies for any inconvenience caused during this essential maintenance work. Please come back later and try again.

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS 5266-1:2011

Emergency lighting. Code of practice for the emergency escape lighting of premises

Status : Revised, Withdrawn   Published : November 2011 Replaced By : BS 5266-1:2016

WITHDRAWN TITLE
*To ask about withdrawn titles contact the BSI Knowledge Centre knowledgecentre@bsigroup.com,
+44 20 8996 7004


BS 5266-1:2011 Emergency lighting – Part 1: Code of practice for the emergency escape lighting of premises

BS 5266-1:2011 gives recommendations and guidance on the factors that need to be considered in the design of, and the installation and wiring of, electrical emergency escape lighting systems, in order to provide the lighting performance needed for safe movement of people in the event of the supply to normal lighting failing. It also gives recommendations for lighting in areas with fixed seating.

This is a full revision of the standard

It has been updated to assist those engineers wishing to protect occupants from the hazards identified by risk assessments and also to evaluate existing premises to decide if they need to be upgraded to meet current requirements. The standard has also been expanded to give guidance to protect occupants from a sudden loss of the normal lighting supply.

The aim of BS 5266-1 is to promote wider understanding of the different types of emergency lighting system which may be employed, and to give guidance on their correct application to the varied requirements of different categories of premises.

The recommendations given in this standard have been drawn up to encourage uniformity of application, based on providing adequate safety to people in the event of interruption of the normal lighting, and having due regard to the hazard level and degree of familiarity of occupants with particular premises.

The standard recognizes that, in addition to ensuring safe unobstructed means of escape from the premises at all times, an important function of emergency lighting is to make possible the immediate location and operation of fire alarm call points and fire-fighting equipment, and another is to minimize the chance of panic arising in enclosed spaces, such as lifts.

The 'responsible person'

The 'responsible person' is someone who has control, or a degree of control, over premises or fire-prevention systems within premises.

UK legislation imposes a duty on this person, to carry out risk assessments and to take such precautions as to ensure as far as reasonably practicable the safety of the occupants. These measures include the provision of safe means of escape, including emergency routes and exits, together with, where necessary, signs indicating them. Adequate illumination needs to be provided, together with emergency lighting of sufficient intensity in case of failure of the normal lighting.

Contents for BS 5266-1 includes:

  • Scope
  • Normative references
  • Terms and definitions
  • Consultation and records
  • Illumination for safe movement
  • Emergency escape lighting design
  • Batteries
  • Wiring systems and circuit requirements
  • Choice of appropriate emergency lighting systems
  • Emergency lighting design procedure
  • Certificates and log book
  • Servicing

Supersession

This part of BS 5266 supersedes BS 5266-1:2005 and BS 5266-10:2008, which are withdrawn.




Standard NumberBS 5266-1:2011
TitleEmergency lighting. Code of practice for the emergency escape lighting of premises
StatusRevised, Withdrawn
Publication Date30 November 2011
Withdrawn Date31 May 2016
Cross ReferencesBS 4678-4, BS 5499-4, BS 7629-1, BS 7846, BS 8434-2, BS EN 50200, BS 8519, BS EN 1838:1999, BS 5266-7:1999, BS EN 50086, BS EN 50171:2001, BS EN 50172:2004, BS 5266-8:2004, BS EN 50200:2006, BS EN 60529, BS EN 60598-2-22:1998+A2:2008, BS EN 60702-1, BS EN 60702-2, BS ISO 7010, BS ISO 3864-1, BS ISO 3864-4, IEC 60331-3, BS 5266-2, BS 5266-4, BS 5266-5, BS 5266-6, BS 5266-10, BS 7273-4, BS 7671, BS 9999, BS EN 81-1, BS EN 81-2, BS EN 12193, BS EN 13032-3, BS EN 60079-14, BS EN 62034, BS EN ISO 9000, CENELEC HD 384, CENELEC HD 60364, PAS 79, HSC L21:2000, Building Regulations 2000. Approved document B:2007, Scottish Building Standards Technical Handbook. Domestic. Section 2:2011, Scottish Building Standards Technical Handbook. Non-domestic. Section 2:, 2011, Building Regulations (Northern Ireland) 2000 Technical Booklet E, Regulatory Reform (Fire Safety) Order 2005, Electromagnetic Compatibility Regulations 2006, Health and Safety (Safety Signs and Signals) Regulations 1996
Replaced ByBS 5266-1:2016
ReplacesBS 5266-1:2005, BS 5266-10:2008
Amended ByCorrigendum, June 2012.
Draft Superseded By11/30227604 DC
DescriptorsEmergency lighting, Escape lighting, Standby lighting, Lighting systems, Emergency electrical installations, Visibility, Illuminance, Lighting levels, Glare, Means of escape from fire in buildings, Fire safety in buildings, Fire safety, Fire-escape routes, Exits, Emergency exits, Signs, Sign lighting (buildings), Siting, Electric cells, Marking, Electric wiring systems, Electromagnetic compatibility, Selection, Design, Risk assessment, Acceptance (approval), Certification (approval), Log sheets, Maintenance, Inspection, Optical measurement
ICS13.200
29.120.99
91.160.10
CommitteeEL/1/1
ISBN978 0 580 79094 2
PublisherBSI
FormatA4
DeliveryNo
Pages52
File Size880.8 KB
Price£220.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the BSI Knowledge Centre knowledgecentre@bsigroup.com,
+44 20 8996 7004
 Your basket
Your basket is empty

BSI’s new unique, user-focused information service transforms the way you manage the compliance of medical device products in your portfolio and product development pipeline


Collaborate, Innovate, Accelerate.


ISO 13485

The world's most popular standard for medical devices quality management


BSI Essentials

Get ISO 9001 and ISO 9000 with 15% discount.


Customers who bought this product also bought

  • BS 5839-1:2013
    Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
  • BS 5839-6:2013
    Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises
  • BS EN 50172:2004, BS 5266-8:2004
    Emergency escape lighting systems
  • BS EN 1838:2013
    Lighting applications. Emergency lighting