BS EN 1366-3:2009 - Fire resistance tests for service installations. Penetration seals – BSI British Standards
Website maintenance 17.00 to 21.00 BST, Wednesday 23 July
BSI shop and standards catalogue will be undergoing routine maintenance between 17.00 and 21.00 BST on Wednesday 23 July and will be unavailable during this time. Please accept our apologies for any inconvenience caused and come back later and try again. Thank you for your patience.

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

Result Types

Industry Sector

ICS Category

BS EN 1366-3:2009

Fire resistance tests for service installations. Penetration seals

Status : Current   Published : March 2009

Format
PDF

Format
HARDCOPY

BS EN 1366-3:2009 Fire resistance tests for service installations. Penetration seals

BS EN 1366-3 specifies a method of test and criteria for the evaluation (including field of application rules) of the ability of a penetration seal to maintain the fire resistance of a separating element at the position at which it has been penetrated by a service.

Penetration seals used to seal gaps around chimneys, air ventilation systems, fire rated ventilation ducts, fire rated service ducts, shafts and smoke extraction ducts are excluded from this standard except for mixed penetration seals.

The purpose of BS EN 1366-3 is to assess:
a) The effect of such penetrations on the integrity and insulation performance of the separating element concerned
b) The integrity and insulation performance of the penetration seal
c) The insulation performance of the penetrating service or services, and where necessary, the integrity failure of a service.

No information can be implied by the test concerning the influence of the inclusion of such
penetrations and sealing systems on the loadbearing capacity of the separating element.

It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes. Such phenomena are only to be noted in describing the general behaviour of test specimens during the test.

This test is not intended to supply any information on the ability of the penetration seal to withstand stress caused by movements or displacements of the penetrating services. The risk of spread of fire downwards caused by burning material, which drips through a pipe downwards to floors below, cannot be assessed with this test.

Contents of BS EN 1366-3:

  • Foreword
  • Introduction
  • Scope
  • Normative references
  • Terms and definitions
  • Test equipment
  • Test conditions
  • Heating conditions
  • Pressure conditions
  • Test specimen
  • Size and distances
  • Number
  • Design
  • Construction
  • Verification
  • Installation of test specimen
  • General
  • Supporting construction
  • Installation of service(s)
  • Installation of penetration seal
  • Multiple penetration seals in one test specimen
  • Conditioning
  • Application of instrumentation
  • Thermocouples
  • Integrity measurement
  • Pressure
  • Test procedure 10.1 General
  • Integrity
  • Other observations
  • Performance criteria
  • Integrity
  • Insulation
  • Multiple penetrations
  • Test report
  • Field of direct application of test results
  • Orientation
  • Supporting construction
  • Services
  • Service support construction
  • Seal size and distances



Standard NumberBS EN 1366-3:2009
TitleFire resistance tests for service installations. Penetration seals
StatusCurrent
Publication Date31 March 2009
Cross ReferencesEN 520, EN 1329-1, EN 1363-1:1999, EN 1363-2, EN 1452-1, EN 1453-1, EN 1455-1, EN 1519-1, EN 1565-1, EN 1566-1, EN 1992-1-2, EN 1996-1-2, EN 10305-4, EN 10305-6, EN 12201-2, EN 12449, EN 12666-1, EN 13501-1, EN 13501-2, EN 13600, EN ISO 13943:2000, ISO 13943:2000, EN 61386-21, IEC 61386-21:2002, CENELEC HD 21.3, IEC 60227-3:1993, CENELEC HD 22.4, CENELEC HD 603.3, CENELEC HD 604.5, EN 10025-2, EN 10056-1, EN 61386-1, IEC 61386 1:1996, IEC 61386 1:1996/AMD 1:2000
ReplacesBS EN 1366-3:2004
International RelationshipsEN 1366-3:2009
Amended ByCorrigendum, November 2009.
Draft Superseded By06/30154175 DC
DescriptorsFire resistance, Fire tests, Building services, Fire safety in buildings, Fire spread prevention, Thermal testing, Seals, Sealing materials, Fire barriers, Penetration tests, Thermal insulation, Performance testing, Walls, Floors, Construction systems parts, Pipes, Electric cables
ICS13.220.50
Title in FrenchEssais de résistance au feu des installations techniques. Calfeutrements de trémies
Title in GermanFeuerwiderstandsprüfungen für Installationen. Abschottungen
CommitteeFSH/22/3
ISBN978 0 580 69607 7
PublisherBSI
FormatA4
DeliveryYes
Pages108
File Size1.361 MB
Price£232.00


 Your basket
Your basket is empty

BSI Membership

Up to 50% off standards and conferences


BSOL

Standards direct to your desktop


Newsletters

Monthly industry and standards news