BS EN ISO 12100-2:2003+A1:2009 - Safety of machinery. Basic concepts, general principles for design. Technical principles – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

Result Types

Subject

Committee

ICS Category

BS EN ISO 12100-2:2003+A1:2009

Safety of machinery. Basic concepts, general principles for design. Technical principles

Status : Superseded, Withdrawn   Published : November 2003 Replaced By : BS EN ISO 12100:2010

WITHDRAWN TITLE
*To ask about withdrawn titles contact the BSI Knowledge Centre knowledgecentre@bsigroup.com, +44 20 8996 7004

BS EN ISO 12100-2:2003 + Amendment 1:2009  Safety of machinery. Basic concepts, general principles for design. Technical principles

The primary purpose of ISO 12100 is to provide designers with an overall framework and guidance to enable them to produce machines that are safe for their intended use. It also provides a strategy for standard makers.

The concept of safety of machinery considers the ability of a machine to perform its intended function(s) during its lifecycle where risk has been adequately reduced.

BS EN ISO 12100-2 defines technical principles to help designers in achieving safety in the design of machinery.

BS EN ISO 12100-2 is intended to be used together with ISO 12100-1 when considering the solution to a specific problem. The two parts of ISO 12100 can be used independently of other documents or as a basis for the preparation of other type-A standards or type-B or -C standards.

BS EN ISO 12100-2 does not deal with damage to domestic animals, property or the environment.

Also available: BS EN ISO 12100-1

Contents of BS EN ISO 12100-2:

  • Scope
  • Normative references
  • Terms and definitions
  • Inherently safe design measures
  • General
  • Consideration of geometrical factors and physical aspects
  • Taking into account the general technical knowledge regarding machine design
  • Choice of an appropriate technology
  • Applying the principle of the positive mechanical action of a component on another component
  • Provisions for stability
  • Provisions for maintainability
  • Observing ergonomic principles
  • Preventing electrical hazard
  • Preventing hazards from pneumatic and hydraulic equipment
  • Applying inherently safe design measures to control system
  • Minimizing the probability of failure of safety functions
  • Limiting exposure to hazards through reliability of equipment
  • Limiting exposure to hazards through mechanization or automation of loadi (feeding) /unloading (removal) operations
  • Limiting exposure to hazards through location of the setting and maintenance points outside of danger zones
  • Safeguarding and complementary protective measures
  • General
  • Selection and implementation of guards and protective devices
  • Requirements for the design of guards and protective devices
  • Safeguarding for reducing emissions
  • Complementary protective measures
  • Information for use
  • General requirements
  • Location and nature of the information for use
  • Signals and warning devices
  • Markings, signs (pictograms), written warnings
  • Accompanying documents (in particular, instruction handbook
  • Bibliography
  • Relationship between this International Standard and the Essential Requirements of EU Directive 98/37/EC
  • Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC



Standard NumberBS EN ISO 12100-2:2003+A1:2009
TitleSafety of machinery. Basic concepts, general principles for design. Technical principles
StatusSuperseded, Withdrawn
Publication Date07 November 2003
Withdrawn Date31 December 2010
Cross ReferencesIEC 60204-1:1997, ISO 12100-1:2003, EN ISO 12100-1:2003, CR 1030-1, EN 614-1, EN 894-3, EN 1299, EN 12198-1, EN 12198-3, EN 13861, EN 61029, IEC 60079-11, IEC 60204, IEC 60335-1, IEC 60745-1, EN 50144-1, IEC 60947-5-1, IEC 61000-6, IEC 61310-1, IEC 61310-3:1999, IEC 61496-1, IEC 61496-2, EN 61496-2, IEC 61508, IEC 62046, IEC 62061, IEC 62079, ISO 447, ISO 2972, ISO 4413:1998, ISO 4414:1998, ISO 6385, ISO 7000, ISO 9355-1, ISO 10075, ISO 10075-2, ISO/TR 11688-1, EN ISO 11688-1, ISO 13849-1:2006, ISO 13850, ISO 13851:2002, EN 574, ISO 13854:1996, EN 349, ISO 13855:2002, EN 999, ISO 13856-1:2001, EN 1760-1, ISO 13857, ISO 14118:2000, EN 1037:1995+A1:2008, ISO 14119:1998, EN 1088:1995, ISO 14120:2002, ISO 14122-1, ISO 14122-2, ISO 14122-3, ISO 14122-4, ISO 14123-1:1998, ISO 14163, ISO 15667, 98/37/EC, 2006/42/EC, EN 60204, EN 60335-1, EN 60745-1, EN 60947-5-1, EN 61000-6, EN 61310-1, EN 61310-3, EN 61496-1, CLC/TS 61496-2, EN 61508, EN 62061, EN 62079, EN 982:1996+A1:2008, EN 983:1996+A1:2008, EN ISO 6385, EN ISO 10075-1, EN ISO 10075-2, EN ISO 11688-1, EN ISO 12100-1, EN ISO 13849-1:2006, EN I
Replaced ByBS EN ISO 12100:2010
ReplacesBS EN 292-2:1991
International RelationshipsEN ISO 12100-2:2003,ISO 12100-2:2003
Amended ByAMD 14975
AMD 14975 is a Corrigendum. Amendment, July 2009. Amends and replaces BS EN ISO 12100-2:2003. Corrigendum, October 2009.
Draft Superseded By00/707576 DC08/30176492 DC
DescriptorsEquipment safety, Occupational safety, Hazards, Design, Safety measures, Product design, Accident prevention, Ergonomics, Control systems, Control devices, Safety devices, Machine guards, Instructions for use, Handbooks, Marking
ICS01.040.13
13.110
Title in FrenchSécurité des machines. Notions fondamentales, principes généraux de conception. Principes techniques
Title in GermanSicherheit von Machinen. Grundbegriffe, allgemeine Gestaltungsleitsätze. Technische Leitsätze
CommitteeMCE/3
ISBN978 0 580 68673 3
PublisherBSI
FormatA4
DeliveryNo
Pages48
File Size983.1 KB
Price£192.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the BSI Knowledge Centre knowledgecentre@bsigroup.com, +44 20 8996 7004
 Your basket
Your basket is empty

BSI Membership

Up to 50% off standards and conferences


BSOL

Standards direct to your desktop


Newsletters

Monthly industry and standards news


Customers who bought this product also bought