BS EN 10025-6:2004+A1:2009 - Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

Result Types

Industry Sector

Committee

ICS Category

BS EN 10025-6:2004+A1:2009

Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Status : Current, Work in hand   Published : November 2004

Format
PDF

Format
HARDCOPY

BS EN 10025-6:2004+Amendment 1:2009 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

BS EN 10025-6:2004 + Amendment 1 (along with BS EN 10025-1) is an indispensable guide to those who specify, purchase or supply steel, of the standard purchase specifications and delivery conditions for flat products of high yield strength alloy special steels supplied in the quenched and tempered condition.

BS EN 10025-6 is the European standard prepared under Mandate M/120 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Construction Products Directive (89/106/EEC).

“Hot forming” was reworded due to the publication of CEN/TR 10347:2006 which had been prepared by the experts in high strength steels of ECISS/TC 10, CEN/TC 135 and CEN/TC 250/SC 3. Hot forming is not recommended for quenched and tempered steels, as the necessary heat treatment after hot forming is very difficult to reproduce.

This European standard, a part of the BS EN 10025 series, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are provided in chemical composition tables and mechanical properties tables and are supplied in the quenched and tempered condition.

The steels specified in BS EN 10025 are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness ≤ 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness ≤ 100 mm for grade S890 and a maximum nominal thickness ≤ 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa to 960 MPa.

Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given under ‘chemical composition’ and ‘mechanical properties’ and are supplied in the quenched and tempered condition.

Also available:

BS EN 10025-1:2004 Hot rolled products of structural steels. General technical delivery conditions




Standard NumberBS EN 10025-6:2004+A1:2009
TitleHot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
StatusCurrent, Work in hand
Publication Date17 November 2004
Cross ReferencesEN 1011-2, EN 10020, EN 10025-1:2004, EN 10027-1, EN 10027-2, EN 10163-1, EN 10163-2, EN 10164, EN 10029, EN 10048, EN 10051, EN 10162, EN 10160, EN ISO 1461, ISO 1461:1999, EN ISO 2566-1, ISO 2566-1:1984, EN ISO 14713, ISO 14713:1999, CEN/TR 10347, ECSC IC 2
ReplacesBS EN 10137-2:1996, BS EN 10137-1:1996
International RelationshipsEN 10025-6:2004
Amended ByAmendment, July 2009. Amends and replaces BS EN 10025-6:2004.
DescriptorsSteels, High-tensile steels, Structural steels, Sheet materials, Weldability, Chemical composition, Compositional tolerances, Marking, Ordering, Designations, Delivery, Inspection, Mass, Sampling methods, Test specimens, Position, Testing conditions, Tensile testing, Impact testing
ICS77.140.10
77.140.50
91.100.99
Title in FrenchProduits laminés à chaud en aciers de construction. Conditions techniques de livraison pour produits plats en aciers à haute limite d'élasticité à l'état trempé et revenu
Title in GermanWarmgewalzte Erzeugnisse aus Baustählen. Technische Lieferbedingungen für Flacherzeugnisse aus Stählen mit höherer Streckgrenze im vergüteten Zustand
CommitteeISE/103
ISBN978 0 580 65569 2
PublisherBSI
FormatA4
DeliveryYes
Pages28
File Size566.8 KB
Price£146.00


 Your basket
Your basket is empty

BSI Membership

Up to 50% off standards and conferences


BSOL

Standards direct to your desktop


Newsletters

Monthly industry and standards news


Customers who bought this product also bought

  • BS EN 10025-4:2004
    Hot rolled products of structural steelsTechnical delivery conditions for thermomechanical rolled weldable fine grain structural steels
  • BS EN 10025-3:2004
    Hot rolled products of structural steelsTechnical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
  • BS EN 10025-5:2004
    Hot rolled products of structual steelsTechnical delivery conditons for structural steels with improved atmospheric corrosion resistance
  • BS EN 10025-1:2004
    Hot rolled products of structural steelsGeneral technical delivery conditions